SAFETY PROCEDURE
1. Do
not attempt to install this air conditioner by yourself
2. Do
not operate the air conditioner with wet hands
3. Avoid
installing the air conditioner near a fi replace or other heating apparatus
4. Do
not turn the breaker off/on or disconnect/connect the power supply plug during
operation
5. Do
not use intermediate connection of the power supply cord or the extension cord
and do not connect many devices to one AC outlet.
6. Install
an earth leakage breaker depending on the place where the air conditioner is to
be installed (humid ,places)
7. Make
sure the ceiling/wall is strong enough to hold the unit-weight. It may be
necessary to build a strong wooden or metal frame to provide added support
8. Turn
the power OFF at the main power board
before opening the unit to check or repair electrical parts and wiring
9. Keep
your fingers and clothing away from any moving parts
10. Clean
up the site after the work, remembering to check that no metal scraps or bits
of wiring have been left inside the unit being serviced
11. Ventilate
the room during the installation or testng the refrigeration system; make sure
that, after the installation, no gas leaks are present, because this could
produce toxic gas and dangerous if in contact with flames or heat-sources.
12. be
sure to wear protective clothing and safety shoes.
13. must
wear gloves when doing the installation work
14. make
sure the equipment used is in good condition and properly before use
Tiada ulasan:
Catat Ulasan